
LUMENX | SOLAR POWERED OUTDOOR AIRFLOW
Bring adjustable airflow to your patio, garage, greenhouse or barn with the LumenX solar wall fan.
This 18-inch solar powered fan with battery combines a metal body, aluminum blades and temperature-based on/off control. Two 30W bifacial solar panels recharge the battery, while three fan speeds and a 180° adjustable tilt let you choose the airflow and direction that suit your space.
A battery-equipped solar fan gives you more flexibility than relying on sunlight only at the moment you need airflow. Charge the system during the day, then use its stored energy after sunset or when sunlight is limited, subject to the available battery charge.
The supplied system uses 2 × 30W panels, for a combined rated panel capacity of 60W. Place the panels where they receive direct sunlight and follow the supplied positioning instructions.
The product information lists a full charge in approximately 2 hours, or approximately 5–8 hours while the fan is running. Charging time varies with sunlight; these are stated estimates, not guaranteed charging times.
Choose the speed to match the airflow and operating time you need. The supplied battery-runtime figures range from approximately 4 hours at maximum speed to up to 20 hours at the lowest speed.
Do not expect the maximum airflow and maximum runtime at the same setting. Available charge and the operating conditions affect how long the fan can run.
The fan features an all-metal body and corrosion-resistant aluminum blades. Its listed IP44 rating is the specific outdoor-protection rating for this model.
A heavy-duty metal build for wall-mounted airflow in patios, garages, barns and other suitable locations.
Corrosion-resistant aluminum blades are part of the fan's metal construction.
Install and use the system according to its outdoor-use instructions. Do not treat the rating as permission to submerge the fan, battery or controller.
TEMPERATURE-BASED OPERATION
The thermostat can switch the fan on and off based on temperature, reducing the need for repeated manual adjustments. Use the system's push-button controls to select the supported settings.
Low-speed guidance matters: the supplied operating information highlights the lowest speed for more consistent automatic on/off operation. It also provides the longest stated battery runtime.
Thermostat operation remains dependent on available battery energy. Temperature-based switching should not be treated as a guarantee that an outdoor space will remain at an exact temperature.
The product specifications list 2,095 cubic feet per minute of airflow capacity and a fan wattage of 48W. Choose from three speed settings rather than using one fixed airflow level.
Tilt the fan to direct air toward your seating area or work space. The 180° specification describes adjustable tilt; it is not a claim that the fan automatically oscillates.
Use this LumenX fan to add air movement to outdoor living areas and suitable utility spaces. Its listed applications include patios, decks, poolside areas, garages, pergolas, porches, greenhouses, chicken coops and barns.
This listing is for the wall-mount model. The supplied description also mentions ceiling and floor configurations. Confirm the approved setup and any additional hardware before using an alternative mounting arrangement.
Position the fan where you need airflow and the solar panels where they can receive direct sunlight. For indoor fan placement, the panels still need suitable sunlight for solar charging.
Follow the supplied installation instructions for mounting, system connections and outdoor placement. The solar panels, battery and controller must be installed in suitable locations—not simply wherever the fan will fit.
| Brand | LumenX |
|---|---|
| Product type | Solar powered outdoor fan with battery and thermostat |
| Fan size | 18 inches |
| Primary mounting type | Wall mount |
| Power source | Solar with rechargeable battery storage |
| Solar panels | Two 30W bifacial panels; 60W combined rated capacity |
| Listed fan wattage | 48W |
| Listed airflow capacity | 2,095 CFM |
| Speed settings | 3 |
| Adjustable tilt | 180° |
| Thermostat | Adjustable temperature-based automatic on/off control |
| Control method | Push button |
| Battery runtime | Approximately 4 hours at maximum speed; up to 20 hours at the lowest speed |
| Stated solar charging time | Approximately 2 hours for a full charge; 5–8 hours while the fan runs. Sunlight affects charging time. |
| Fan body | All-metal construction |
| Blade material | Corrosion-resistant aluminum |
| Outdoor rating | IP44 |
| Multiple-fan control | One controller can manage multiple fans within approximately 33 feet |
| Listed usage | Indoor and outdoor, with suitable solar-panel placement |
Performance figures are from the supplied product specifications. Charging and runtime are operating-condition estimates, not guaranteed results for every installation.
Yes. This is the battery-equipped solar fan. Stored energy can power it after sunset or when sunlight is limited. Operation depends on the battery's available charge and selected speed.
The supplied figures range from approximately 4 hours at maximum speed to up to 20 hours at the lowest speed. The longest runtime and highest airflow do not occur at the same setting.
The system uses two 30W bifacial panels, giving a combined rated panel capacity of 60W. Actual solar charging depends on the sunlight reaching the panels.
The product information states approximately 2 hours for a full charge, or approximately 5–8 hours while the fan is running. Those are stated charging estimates; sunlight and operating conditions affect the result.
The thermostat switches the fan on and off based on temperature. The supplied guidance highlights the lowest speed for more consistent automatic operation. The feature is subject to available battery energy and does not guarantee an exact outdoor temperature.
Yes. The supplied description states that one controller automatically manages multiple fans within approximately 33 feet. Nearby units may respond together, so confirm control arrangements before ordering multiple fans that need to operate independently.
There are three speed settings and a 180° adjustable tilt. The tilt lets you direct the airflow; automatic oscillation is not specified.
The supplied specifications list an airflow capacity of 2,095 CFM and a fan wattage of 48W. The solar-panel rating is separate: two 30W panels.
The listed outdoor rating is IP44. The fan has an all-metal body and corrosion-resistant aluminum blades. Follow the instructions for exposure limits and placement of the fan, battery, panels and controller.
Wall mounting is the primary setup listed for this product. The supplied description also mentions ceiling and floor use. Confirm the approved mounting configuration and any required additional hardware before installation.
Yes. Those spaces are among the listed applications, along with patios, decks, pergolas, porches and chicken coops. Choose suitable mounting and panel locations so the system can receive sunlight and operate as instructed.
A household outlet is not required for the described solar-charging operation. The fan, battery, controller and solar panels still need their specified system connections. An AC adapter, USB charging option or alternative charging method is not specified in the supplied information.
Contact Outdoor Solar Outlet with your intended mounting location, available sunlight and the number of fans you plan to use. For multiple units, mention whether you need shared or independent control.
There is no manual added for this product.
At OutdoorSolarOutlet we take pride in offering you a curated selection of Solar Solutions alongside unparalleled support. Discover a place where reliability, quality, and customer satisfaction converge, making your shopping journey not just convenient but truly exceptional.
Your order is important to us. If there’s an issue with delivery, our U.S.-based team is here to help and make it right.
We meet Google’s high standards for customer service and a reliable shopping experience.